Scolia Home 2 Installation – Step-by-Step Guide

The Scolia Home 2 transforms your dartboard into a modern automatic scoring system. Once installed, it automatically detects thrown darts and provides access to online matches, training modes, statistics, and much more.

Check the Package Contents

Before starting the installation, make sure all components are included:

• Scolia Home 2 camera system

• Camera mounting bracket

• Processing unit

• Power supply

• Connection cables

• Mounting hardware

Step 1: Prepare the Dartboard

First, ensure that your dartboard is mounted according to official tournament specifications:

• Bullseye height: 173 cm (5 ft 8 in) from the floor

• Throwing distance: 237 cm (7 ft 9¼ in)

Make sure the dartboard is securely mounted and does not move or rotate.

Step 2: Install the Mounting Bracket

The mounting bracket is installed above the dartboard.

• Measure the position carefully

• Use a spirit level for accurate alignment

• Mark the drill holes

• Securely fix the bracket to the wall

Proper alignment helps ensure the highest scoring accuracy.

Step 3: Mount the Cameras

Attach the cameras to their designated positions on the mounting bracket.

Important points:

• Tighten all mounting screws securely

• Route cables neatly

• Ensure the cameras have an unobstructed view of the entire dartboard

Step 4: Connect the Hardware

Connect all camera cables to the processing unit.

Then:

• Connect the power supply

• Switch on the system

• Allow a few minutes for the startup process to complete

Step 5: Connect to the Network

An internet connection is required for full functionality.

You can connect using:

• Wi-Fi

• Ethernet (LAN)

For maximum stability, a wired LAN connection is recommended.

Step 6: Create and Link Your Account

Create your user account and link your Scolia Home 2 system.

Once registered, you will gain access to:

• Online matches

• Training modes

• Match history

• Player statistics

Step 7: Calibrate the System

The system will guide you through the initial calibration process.

For best results:

• Ensure good lighting around the dartboard

• Keep the playing area clear during calibration

• Make sure all cameras have a clear view

The system will automatically detect and map the scoring segments of the dartboard.

Step 8: Perform a Test Session

Start a practice game and throw darts at different areas of the board.

Check that:

• All darts are detected correctly

• Scores match the actual hits

• Double and triple segments are recognized accurately

If any inaccuracies occur, simply repeat the calibration process.

Tips for Best Performance

• Use consistent lighting around the dartboard.

• Avoid direct sunlight hitting the board.

• Keep camera lenses clean and free from dust.

• Ensure the dartboard is firmly mounted.

• Use a stable internet connection for online play.

Ready to Play!

Once installation and calibration are complete, your Scolia Home 2 is ready to provide automatic scoring, online competition, detailed statistics, and professional-level training features. Most users can complete the setup in less than an hour and start playing immediately. 🎯